A ute toolbox with drawers saves you digging for small tools. These half lid boxes open across the upper part of the side. A fixed lower wall, about 300mm high, stays shut. Slide-out drawers inside keep hand tools sorted, with room for bigger gear as well.
They are part of our side opening toolboxes. Every box is 600mm deep and 820mm high, with a 440mm high opening.
Pick raw checker plate (3mm including the checker), raw 2.5mm flat plate, black or white. Each box has a whale tail lock with barrel and key, plus a padlock option. You also get a steel pinch rubber seal, stainless steel gas struts and one removable shelf.
Fit one to a ute tray, truck or trailer, and measure your tray first. Compare more drawer toolboxes, or the same lid without drawers in half lid opening. Need a taller box? The truck half lid with drawers range is 1200mm high.
Most orders leave our Prestons NSW warehouse within one business day. We deliver Australia-wide with tracking. You can also pick up from Prestons. Bookings are essential.
The 1400mm and 1500mm boxes have 2 drawers. The 1700mm and 2100mm boxes have 3 drawers.
The opening is 440mm high on every box in this range. Its length depends on the box, from about 1230mm on the 1400mm box to 1930mm on the 2100mm box. A fixed lower wall about 300mm high stays shut.
Yes. Locks can be keyed alike across more than one toolbox. Ask for it in the delivery instructions when you check out.
