Skip to content
NOVEMBER SALES NOW LIVE | WE ARE FULLY OPERATIONAL | PICK UP & DELIVERY

Checker Plate

A checker plate toolbox has a raised tread pattern pressed into the aluminium. It is the traditional finish for ute, truck and trailer boxes. Most of this range is raw aluminium, with a handful in black.

We list two thickness figures for most boxes: 3 mm including the checker and 2.5 mm excluding it. The lower figure is the real sheet thickness, because checker plate should be measured at its thinnest part. Our under tray checker boxes are 2 mm including the checker.

The range runs from 320 mm holders to 2200 mm camper boxes. It covers:

  • full side and 3/4 side opening boxes, some with drawer slides
  • part canopies and gullwing canopies
  • top opening, chest and cross deck boxes
  • under tray boxes, generator boxes and fridge slide boxes

Locks are T-handle or whale tail, depending on the model. Most boxes have a rubber seal to help keep out dust and water.

Compare with our smooth flat plate series, or browse side opening and camper toolboxes. We dispatch Australia-wide from Prestons NSW.

103 products fitting your needs

Questions about Checker Plate

Start with your tray size. Our checker plate side opening boxes run from 900 to 2100 mm long. Top chest boxes are 1200 to 1700 mm, and part canopies are 1770 mm. Under tray pairs are 600 to 940 mm. Then pick full side, 3/4 side or top opening access.

Yes. Full side opening boxes come with 2 or 4 drawer slides at 1400 and 1700 mm. 3/4 side opening boxes have 2 or 3 drawers from 1400 to 2100 mm. There are also 1900 mm high side truck boxes with drawers, and a 1900 mm checker plate 3 drawer unit.

Most of our checker plate boxes are 3 mm including the checker and 2.5 mm excluding it. Checker plate should be measured at its thinnest part, not the raised tread, so 2.5 mm is the true sheet thickness. Our under tray checker boxes are 2 mm including the checker.

Yes, a few. Black checker plate models include the fridge and BBQ slide boxes, a 2200 mm 3 lid box with slides, a 1600 mm gullwing canopy and a 1900 mm high side truck box. See all black ute tool boxes.

4.9(19,365)